High/1 (level sensitive) = Enable Low/0 = DisableĬonnect these outputs to the corresponding inputs ( and of the Crestron module. ![]() When the enable line goes low, this will drop the current connection, no subsequent connection can be established, and will equal 0d. ![]() The inputs enable communication for as long as the input is high. If the symbol is assigned a specific IP address, it will accept a connection ONLY from that IP address.Ĭonnect these inputs to the corresponding outputs ( and of the Crestron module. In typical applications the Interface symbols should be assigned the IP address 0.0.0.0., to allow a connection from any IP address. The XPanel project will alternate between connections each time it establishes communication with the Crestron system. To facilitate communication and re-connections, both Interface symbols (Connection 1 and Connection 2) must be defined. ![]() The XPanel for Mac Interface devices (Connection 1 and Connection 2) are TCP/IP servers designed to connect to the Crestron module "iPhone and iPod Touch Interface v2.0 (cm)" to allow an XPanel project running on a Mac to communicate with the Crestron control system. XPanel for Mac Interface (Connection 1 and 2)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |